build feeders for Dogs

build feeders with dog bowl

Futterbar build for dogs

Instructions on how to build a Futterbar for medium dogs. Here are The project is also suitable for dog lovers who feel that in the area of ​​home improvement rather than beginners. The built-in chair Bowl itself can be built easily with a little technical skill. needs simple wooden chairs that you can buy cheap for which one can use discarded children's chairs.

Difficulty: medium

Workload: about 1 hour plus. Drying time

Contents: Blueprint for feeders with feeding bowls

  • Required tools and materials
  • Saw hole for Hundenapf - Step 1
  • transferred to outline template - Step 2
  • Step 3 - Template stick
  • Step 4 - painting and filling
  • Dog bone template (as a master)

Required tools and materials

build feeders with dog bowl - materials and tools

material list

  • 2x chairs (seat height corresponding to the height of the dog back)
  • 2x bowls with protruding edge
  • adhesive film
  • pen
  • Bone template for self-printing
  • cutter
  • blackboard paint
  • brush

Commercially available materials available at the hardware store.

Tool:

  • Saw, for example, Battery Multisaw PST 10,8 LI from Bosch

build feeders with dog bowl - Step 1

Saw hole for Hundenapf - Step 1

First, measure the diameter of the lapping pan below the edge and then draw a correspondingly large circle centered on the seat of the chair.
Then cut the circle along the line. A clean hole is achieved with a battery Multisaw, for example, the PST 10,8 LI from Bosch. Repeat with the other chair.


build feeders with dog bowl - Step 2

transferred to outline template - Step 2

So that later a perfect dog bones decorated the back, print the template and cut out. transfer the outline of the bone with a pencil on the adhesive film and cut out along the shape.


build feeders with dog bowl - Step 3

Step 3 - Template stick

Now stick the adhesive film with the dog bone motif as Malschablone on the back of the chair.


build feeders with dog bowl - Step 4

Step 4 - painting and filling

Subsequently, the glued bone shape coloring with brush and paint the panel.

Important: lasssen dry paint well, so no frayed edges arise!

Then remove the film and label the black area as desired, for example, "eat" and "Drink". place finally the dog bowl in the sawn hole, fill it with your favorite snacks.

Dog bone template (as a master)

A master - & quot template; dog bone & quot;Click to enlargebuild feeders with dog bowl - the finished cup holderThe self-made feeders for Dogs

Buy products for reverse engineering on Amazon