build football throne itself
build football throne itself
make throne for true football fans themselves
A reserved space in front of the TV or the big screen, more a throne than a normal chair, with built-in cup holder for the cool beer and a storage space for finger food. Sounds like the perfect place to watch football games or other sporting events.
Thanks to our fine building instructions of this throne does not have to be just a dream any longer. snatched the necessary tools and building materials and ran to pottering. The experienced handyman will not pose any problems this. In about five hours of football throne could be already in the home garden.
Missing to now get something to eat? How about a delicious piece of meat that was gebruzelt on the barbecue? Another great craft ideas there are also in our subject area furniture construction manuals.
Since only remains to say: Enjoy a private viewing.
build football throne itself: Table of Contents
- material list
- Difficulty and time required
- Blueprint for football throne
- Construction sketch for football throne
- Wood strips à 3.2 x 3.2 x 240 cm
- 8 wood strips each 7 x 1.5 x 240 cm
- Holzbohrer 4 mm
- Wood screws 4 x 70 mm
- Wood filler
- Hole saw 64 mm
- Acrylic paint in white
- tracing paper
- Green DC-fix foil
- triangle ruler
- Cutter with cutting base
- Cordless garden saw
- Battery Multischleifer
- Cordless two-speed drill
- Bosch Fine Spray
- Cordless Screwdriver
- Hole Saw
Difficulty and time required
- Difficulty: Increased to high difficulty
- Duration: 5 - 6 hours without drying time
Blueprint for football throne
size Cutting wood strips
Sawing and regrinding
With the battery Gardener 3.2 x 3.2 cm strips of wood in the dimensions 4 x 70 cm, 4 cm x 48 and 4 x 51 cm sawing. The cutting edge with the battery Multischleifer regrinding.
Assemble backbone for football throne
Assembling and regrinding
assembling the strips in the figure with the cordless two-speed drill with a 4 mm wood drill and the electric screwdriver. The screw holes with putty fill and regrinding the places after drying. sawing with the battery-Gardener 7 x 1.5 cm strips of wood in the dimensions 2 x 48 cm, 2 x 61cm, 7 x 52 cm and 7 x 125th
Mark slant on strips
Mark an angle with the protractor
Add twice two of the 52 cm strips side by side and mark with a protractor a slope of 15 degrees from the top. Add twice two of the 125 cm strips side by side and mark with a protractor a slope of 30 degrees from the top.
Shorten and regrinding
The marked slopes with the cordless garden saw Saw. With the cordless garden saw to cut the 3.2 x 3.2 wood to measure 58 cm. Sharpen all cutting edges with the battery Multischleifer. With a distance of 15 cm in the two 61 cm strips centered drill a 64 mm hole with the cordless two-speed drill and a hole saw. Centrally beneath the two perforated strips screw the 48 cm strips and, as shown in the Figure, mounted on the frame.
paint the football throne with paint before assembly
Football throne sprayed with paint and assemble
The frame and the remaining strips of the throne with the fine spray spraying white. Screw the 52er strips (incl. the four bevelled edges) as the seat surface from below the frame with the electric screwdriver. Be careful to ensure that the rear part of the seat surface with the bar to be screwed is flush. The 125 strips stuck obliquely in the frame and the resulting backrest with the last supplied sawing narrow bar 58 mm fixed directly under the armrest by screws.
record football on film
transmitted football on film
let the template for the football in the copy shop on A3 enlarge. Football transferred with tracing paper on green dc-fix foil. Cut football with the cutter. Pull off backing paper and stick the ball in the back of the chair. Finish is the throne.
Tip: If you know the seat too hard, you curl up with a homemade, lawn green cushions. How do you make it yourself, learn tinker football pads in the instructions.
Construction sketch for football throne
Construction sketch for football throne (click to enlarge)