collect rainwater barrel for rainwater

collect rainwater barrel for rainwater

Rainwater collection saves money and the environment

Instead of water the garden in the hot season with precious drinking water or groundwater, it has now in the spring to collect the irrigation water for the summer in a rain barrel. So the precious groundwater resources are protected and at the same time the wallet. Finally, there is the rain water at zero cost - and on top of that, the plants are happy, because the water from the top is soft and decalcified.

Specific Rainwater collector, the the Downspout of the gutter be installed, directing the flowing down rainwater in the rain barrel. In good collection systems such as the Rainboy Marley, is the efficiency of over 90 percent. As a result, almost the entire amount of water that flows through the downpipe, collected by the rain water tank and discharged. 

In addition, rain collectors should a Overflow protection be fitted, which prevents the barrel may overflow. This works on the principle of communicating vessels: rain collectors and ton are connected together by a length of hose.

Contents: rainwater and rain barrels

  • Gutters protect buildings from moisture damage
  • Rainboy: rain barrel with overflow protection for garden irrigation
  • Install downspout for the rain barrel
  • Regentonne New Generation
  • Regendieb to save water

Gutters protect buildings from moisture damage

The condition that rainwater can be collected at all, is a reliable and intact Gutter System. This not only helps to save water, but also protects the building from costly damage caused by rainwater or water spray. This also applies to carport, gazebo or cottage. The installation of the impact-resistant and dimensionally stable plastic gutters is easy and quick to do conceivable. Because consuming soldering is no need for a secure connection because the items will simply plugged together or glued.

If you want to know which channel is the right one for your roof, look at the side www.dachrinnen.de. There is next to lots of useful information about gutters under the point service is also a calculation tool "Dachrinnenberechner",

Contents: rainwater and rain barrels

  • Gutters protect buildings from moisture damage
  • Rainboy: rain barrel with overflow protection for garden irrigation
  • Install downspout for the rain barrel
  • Regentonne New Generation
  • Regendieb to save water

Rainboy: rain barrel with overflow protection for garden irrigation

collect rainwater barrel for rainwaterRain barrel at the downspout of the guttercollect rainwater barrel for rainwaterRain barrel with overflow protection

Once the water level in the barrel, the maximum filling height has reached the rainwater flows through the downspout drains. In addition, the Rainboy has a self-cleaning filter system It ensures that the water butt is always filled with clean water. Impurities are purged in the lower drop tube and discharged into the channel. The rain collector Marley "Rainboy" there are in the building materials trade and construction market in the common gutter colors gray, brown and a coppery. It fits for downspout sizes from 87 to 105 millimeters in diameter.

Install downspout for the rain barrel

collect rainwater barrel for rainwatertake measurements for downpipecollect rainwater barrel for rainwatercut pipescollect rainwater barrel for rainwaterdeburring cut ends

Especially effective is the collection of rainwater over gutter, downspout and rain barrel. For this, attach a bow on the neck of the gutter and measure the distance to Gegenbogen on the wall. The insertion depth of 4 cm and the distance to the house wall to pay attention. If the roof overhang only slight, it is enough two arches with the bow connector to connect directly.

Pipes from quality manufacturers can be attached quickly and easily with a fine-toothed saw to the correct length. Particularly precise, it is with a miter or a miter saw. Then it is easy to deburr the cut ends and to ensure that the items assembled easily and tightly and thus the collection efficiency of the downpipe can be increased. 

collect rainwater barrel for rainwaterAssemble itemscollect rainwater barrel for rainwaterfixed clampcollect rainwater barrel for rainwaterloose clamp

In order to attach the drop tube on the house wall, fixed clamps and loose clamps are fitted with plugs on the house wall. The fixed clamp secures the downspout at the top. For an eye bolt is mounted on the side of the tab so that the downspout can be firmly fixed at this point. The distance between the clamps should be 2.00 up to 2.50 m.

With a "loose clamp" the drop tube is guided in the middle or at the bottom. The eye bolt is mounted between the plates. Thus, the tube can move in the clamp and compensate for changes in length due to temperature fluctuations. Finally, the drop tube end is led to a further pipe for rain water channel or it ends in a rain water-absorbing well.

Regentonne New Generation

Free irrigation water, collect advantageous with this rain barrel!

  • green
  • polyethylene
  • round
  • The ideal vessel for rainwater collection
  • Complete package including lid and tap
  • complete range
  • Capacity 210 liters

Order water butt now online


collect rainwater barrel for rainwater

Regendieb to save water

Rain thieves are to be filled for the garden the most elegant and cleanest way, the rain barrel with the precious liquid. They are simply inserted into the downspout and keep leaves and debris through a sophisticated filter system of the rain barrel away.

More rainwater harvesting next generation with the Regendieb here.

Regendieb now online!

 

 

buy rain barrel online