Fireplace, stove and oven

Fireplace, stove and oven

Find out everything important about fireplace, stove and tiled stove. In addition to information on various fuels, such as wood, ethanol or gel yourselfer will find on these pages building instructions for a wooden shelter or stove as well as purchase recommendations on various kinds fireplace and tips on proper storage of firewood.

Fireplace, stove and oven

Wood stove

A stove and a fireplace provide for the transitional period, a popular alternative to heating with oil, gas or night storage heater. Of the designs on the fuel types to homemade here you can find everything you should know about a fireplace. Wood stove

build fireplace and fireplace itself

Who wants to build its own fireplace must select a material that meets the prescribed destination class. In this guide, you will learn which provisions apply to the chimney and furnace construction and how to build a fireplace with porous concrete. build fireplace and fireplace itself

Fireplace, stove and oven

Wooden shelter-building instructions

To use wood for a fireplace or stove, it must be kept dry and protected. This construction manual shows you how to build a shelter itself. There are also tips for proper storage of fuel and firewood. Firewood shelter-building instructions

Fireplace, stove and oven

Ethanol fireplace and gel fireplace

Ethanol and gel fireplaces are a good alternative for those who want to build a fireplace without extensive modifications. To learn more about ethanol and gel fireplaces and their fuels. Ethanol fireplace and gel fireplace

Wood pellet and wood pellet stove

Fireplace, stove and ovenWood pellets for wood pellet

High oil prices and CO2 emissions are among the most common reasons why homeowners change as part of a modernization of heating energy source. A good alternative to oil or gas heating provide wood pellet and stoves. This is because the firing with wood pellets reduces heating costs by up to 40% compared to gas and oil. They are made pellets from remnants that arise during wood processing and release only the amount present in the wood of CO2 when burned. This makes wood pellets for an environmentally friendly and economical fuel. Heaters and furnaces that operate with pellets, are available, among others, as a single ovens and fully automated heating systems. Another advantage: Those who opt for a wood pellet or wood pellet stove, a must state funding apply to the Federal Office of Economics and Export Control or the KfW bank.

Wood stove in combination with solar energy

The combination of wood and light is an efficient method to reduce heating costs. To this end, there are stoves that with firewood are operated at the same time and the heat generated by solar panels solar energy use it as a further energy supplier. These devices have a Water heat exchanger, the as buffer memory is installed between the furnace and the heating system. The energy produced in this way is given to one-third of the room, while two thirds are used for water heating. Condition for the combination of heater and solar energy is a corresponding Solar panels on the roof. Insufficient solar energy, the heater compensates for the lack of energy. Another advantage of this combination is the low-emission use, because these stoves emit only the amount of CO2 during combustion, which is stored in the wood.

Frequently asked questions about the stove

clean-burning stove

After the burning of firewood a small amount of ash remains, which should be disposed of regularly. Importantly, the ashes must be completely cooled before disposal, otherwise there is fire hazard.

Shiny soot in the oven and stove pipe

When wood burns, it is not sufficiently dried, quickly shining soot is produced in the oven or in the connector. This creates the danger that this soot inflamed and lead to a chimney fire. Thus, you should always remove the shiny soot. Generally three elements in the stove should be thoroughly cleaned in the cleaning: the body, the interior and the disc.

Disposal of ashes

The body is made mostly from the steel parts of the stove, so you can wipe it with a clean, dry cloth the body easily. In the interior, in turn, it is sufficient if one empties the ash therein. By the way, the Federal Environment Agency recommends the cooled ashes in the trash dispose. Incompletely combusted residues may contain carcinogenic substances.

Sooting of the disc

Once fouled the disc, it should be quickly cleaned with a special fireplace glass cleaner. Because when repeatedly fire the soot particles burn and can not be removed, so that the disk is permanently soiled. damp newspaper or kitchen paper that was previously pushed into the in-furnace ash is used for cleaning. Then the disc is rubbed. Wipe now with dry cloth.

Maintenance by the chimney sweep

In addition to regular cleaning of the stove a chimney sweep should be at least once a year, remove the deposits in the flue pipe and chimney, otherwise they will obstruct the flue.

Stove during the summer break

Thus, the stove works correctly for fall or winter, you should clean it thoroughly before it is not used for the warmer months for a longer period: Does the oven cleaning openings, they must only be screwed and existing deposits be swept with a brush down into the fireplace. Subsequently, the stone or the thermal Flammleitblech is removed and the soot brushed away or sucked in the combustion chamber. If the device has no openings for cleaning, you gently decreases the entire pipe joint and sweeps them from outside. In addition, should door handle, door hinges and Ash tray door be treated with a special grease, so that they remain flexible. Loose screws are tightened. Finally, the Thermo stones checked for cracks. but are pieces broken off the stone must be replaced. In general, this is necessary every few years.