Marley gutters

Mount Duplex gutters and box gutters

Adhesives you one!

Adhesive technology in duplex and box gutters.

In addition to the plug-in system for half-round gutters Marley also offers a sophisticated and safe adhesive system for the box and the Duplex gutter. The assembly principle of both systems is the same as the specifics of the adhesive bonding to the Marley special glue will be explained here

Mount Duplex gutters and box gutters

a) The hole for the sequence is most easily with a hole saw attachment saw out. for all sawing applies: The edges must be deburred thoroughly before bonding.


Mount Duplex gutters and box gutters

b) Clean the nozzle channel on the inside as well as the gutter in the bonding area on the outside with Marley gutters cleaner and degrease. Then apply the adhesive on the inside of the nozzle.


Mount Duplex gutters and box gutters

c) connecting After application of the adhesive to the nozzle channel immediately the parts together. To hang the gutter outlets on the rear fold and cliffs above the front bead.


Mount Duplex gutters and box gutters

d) also clean the tails prior to bonding thoroughly and greased slightly with Marley special adhesive. The end pieces are used left or right.


Mount Duplex gutters and box gutters

e) When connecting 2 gutter ends the connection shell must be used. Apply the glue to the insides of the connecting casing and insert the gutter ends into the joint shell.


Mount Duplex gutters and box gutters

f) Marley special adhesive and Marley special cleaner are optimally matched to the nature of the plastic of Marley gutters and guarantee reliable and durable watertight connections.

Secure gluing - clean and fast!

Mount Duplex gutters and box guttersMount Duplex gutters and box gutters

The Marley special adhesive dissolves the plastic of the gutter and leads to a cold welding of the material. When bonding the shaped parts (shell, corners, end pieces, nozzles) with the gutter may ooze out too much applied adhesive and contaminate the surface of the gutter. This can be avoided if you always apply the glue on the insides of the bonding moldings and then insert the fittings into the gutter or cliffs on the channel. Subsequent processing of the adhesive for sealing the seams is not possible

Marley logo

For more tips, tricks and hints on the subject gutters See www.marley.de.