wall installation

How sanitary installations are easier

wall installation

to make a bare room to a bathroom requires a lot of skill. Wall installation systems are increasingly being offered at the hardware store. The handyman benefits from this simplification, which was developed for the craft. Nevertheless, still a good knowledge and technical skills must be present.

to modernize a bathroom is a labor-intensive, costly and expensive home improvement project is but it is not unsolvable. wall installation systems are an excellent way to make the bathroom creatively while simplifying several steps.

This article is intended to provide initial information on the subject.

Contents on-wall installation

  • wall installation
  • How sanitary installations are easier
  • simple panel
  • Real universal talent
  • Benefits of pre-wall installation systems

wall installation

Craftsmen often had that they had to move a number of power and water lines on one hand, but on the other hand allow the strict rules of DIN1053 no caulking and slot works in masonry more the problem. With pre-wall systems for the bathroom manufacturers have revolutionized a number of installation services: workload, noise and dirt are reduced at shorter assembly times. At the same time, the systems offer design options that could previously be achieved only with considerable additional work.

A wall installation can be done in different ways. One way is to use mounting frames. These scaffolds are screwed on the wall or on the ground; all cables, connectors, and z. B. cisterns are mounted in the frame and moved within the frame. these frameworks are dressed then with moisture-resistant gypsum board or chipboard. the equipment items such as washing, toilet bowl, urinal, bidet, shower and bath are then connected to the terminals on this record.

Bathroom planning is important. Each measure is more promising when previously considered intense and precisely as possible recorded. Before the start of the construction work at least the outline of the bathroom with existing barriers (eg. As fireplace projections) and the intended sanitary objects should be recorded (all to scale!) In any case.

To avoid having to continually redraw or erase, the objects can be crafted as a template. Some manufacturers offer (such as kitchen manufacturer) prefabricated arches to plan (templates with the shapes of the respective series) or Badplanungssoftware (simple CAD programs with virtual view of the optical setup) to.

One step further are installed modules that contain pre-assembled all attempts needed in the bathroom and waste pipes, fittings and connectors at the factory. Some of the sanitary articles are supplied directly. The module only needs to be connected to the supply and sewers.

The simplest of the art variant is the attachment of lines, fittings and brackets on the wall. Prior to that, a second wall is fastened, in turn protrude through which only the connectors. This variant dispenses with a frame structure, which indeed cheapened the measure might, but maybe more inviabilities brings with it (accuracy, flexibility).

simple panel

If all the individual modules (or a complete module) aligned, attached and connected in place, the panel will begin. This can usually be done with plasterboard or chipboard. What is important here, however, that it is either already dealing with wet room panels or that the plates are treated carefully and as specified by the manufacturer of sealing products. Errors are here in hindsight extremely unpleasant: Walls draw moisture and go on, mounted tiles flake off, molds are created and the more surprises.

wall installationToilet and shower are mounted on a pretext framework.wall installationAnother possibility for the wall installation is fixed directly to the wall.

Since the plate should have a certain stability, depending on the sanitary object and wall covering, a plate should be at least 12.5 cm thick. Some manufacturers state in their instructions, a recommendation. Especially effective is the use of plates that can mitliefern factory of the manufacturer of the pretext system. They are tailored to the modules and already have all sections that are needed. Here, the home improvement must decide for himself whether he wants to pay labor savings and error reduction with an additional price to conventional plate.

Are the work progressed so far missing is (prior to the application as detergents and toilet bowl) the attachment of suitable wall covering. Here, of course, many surfaces can be used: (note rear vents!) Tiles, decorative plaster, wallpaper or even suitable wood paneling.

Real universal talent

A horror for every home improvement: Leaning floors and walls! Wall installation systems offer excellent plus point here is that they have variable feet. If the floor is therefore not perfectly level, each individual module can be properly aligned using a spirit level.

Particularly appealing to wall installation systems are the creative possibilities. The scaffolds can be installed not only on the wall, but also the middle of a room. After the independence of existing connections increases creative flexibility. Such a system makes it possible with a reasonable effort to make a bath once from all sides accessible - when the corresponding space is available. Similarly, space-saving corner solutions, and various solutions can be realized angle (times inclined in space rather than right angle). A system which has a space separation function can simultaneously be provided on both sides with an installation (z. B. sink and toilet bowl).

The practical side of such wall systems convinced. So thankfully disappear unattractive strainer in "underground", Who likes dressing cisterns and drainage pipes, which are difficult to access for cleaning and beyond usually have many rough edges. The resulting ledge on the other hand is a welcome counter space, which is flat and easy to maintain.

Benefits of pre-wall installation systems

  1. Substantial dirt and noise reduction
  2. Shorter assembly times and less labor
  3. Correct, straight alignment of the elements by variable feet
  4. Comfortable and easy connection of sanitary objects
  5. possible object placement almost anywhere in the room at the desired height
  6. All incoming and outgoing lines are obscured installed
  7. Cleaning costs lower because less "dirty corners"
  8. No impairment of masonry static
  9. Increasing the sound insulation to the outside

Another positive side effect is to improve the sound insulation properties of the bathroom. If objects are mounted directly on a wall, is transmitted e.g. Water inlet and -ablaufgeräusche to the whole building. Almost everybody knows the acoustic accompaniment of a toilet flushing in other rooms. Wall installation systems do not prevent these noise transmission, but they reduce significantly under certain circumstances. Because the installation located in front of the wall reduces the wall contacts and provided with insulation gap acts as sound and thermal insulation.

One step further are installed modules that contain pre-assembled all attempts needed in the bathroom and waste pipes, fittings and connectors at the factory. Some of the sanitary articles are supplied directly. The module only needs to be connected to the supply and sewers.

The simplest of the art variant is the attachment of lines, fittings and brackets on the wall. Prior to that, a second wall is fastened, in turn protrude through which only the connectors. This variant dispenses with a frame structure, which indeed cheapened the measure might, but maybe more inviabilities brings with it (accuracy, flexibility).

Buy-wall installation elements on Amazon